Product Description
1. Satisfy the test requirements of 0-700KW, engine within 3000 rpm.
2. It can collect parameters such as speed, torque, power, exhaust temperature, engine oil temperature, engine oil pressure, and outlet water temperature.
3. The data can be displayed on the computer, the data can be automatically saved, and the curve can be drawn.
4. It can complete the engine minimum no-load stable speed test, total power test, load characteristic test, etc.
5.Need to prepare a 10 cubic underground pool, pipe connection
6.Requires exhaust extraction (drawing exhaust gases away)
| Maximum absorption rate (KW) |
700 |
| Speed measurement accuracy (F.S) |
±0.5‰ |
| Torque measurement accuracy (F.S) |
±0.2% |
Product Features
Measuring and controlling instrument
The measurement and control instrument is a horizontal desktop structure, which is composed of a console, a lower computer, and an upper computer. The upper and lower computers are built in the console. The upper right of the console is a digital window, which displays the main parameters in real time. A 19-inch color LCD display is embedded in the upper left of the console and fixed on the panel. The panel is oil-resistant and flexible, and displays the main and auxiliary parameters. The main and auxiliary parameters are matched according to the specified technical requirements.
Host computer control system configuration and main functions
Advantech industrial computer is selected as the upper computer, and the industrial computer and the required boards are selected from well-known brands. Send the serial port reserved for future expansion to the user, and integrate it into the computer system according to the communication protocol provided by the user.
Industrial computer configuration: cool dual-core 2.6G or more, RAM: 1G, hard disk: 250G,
10/100M adaptive network card, 19-inch LCD display, RS232/485 expansion card
record function
1. The control system needs to upload and store measurement data and fault information in real time. Automatically save data to the network database, temporarily save the data to the local database when the network database fails, and then dump to the network database at an appropriate time.
2. Automatically generate reports and curves.
3. Alarm protection function. The measurement control system has three levels of alarm and protection functions. Each measurement parameter can be set by the user on the computer. The action mode of each level of alarm:
4. The entire upper computer control system is centered on special configuration software, equipped with software such as test condition editing, test data processing, and test processcontrol. The data exchange betweenthe upper and lower computers is realized through the field bus, and the entire engine test control process is completed. All data processing and screen display. All measurement parameters can be displayed on the LCD. Display mode: digital display and curve display. Torque, power and fuel consumption can be automatically corrected by the computer, and the correction formula can be automatically selected according to the model (according to the national standard GB/T18297-2001), or manually
input and calculated by the operator.
5. Automatically complete various program control tests according to the set steps. The combination of steps can be combined arbitrarily according to the experiment. According to the JIS standard and GB/T6072.1-200 national standard, the measured data is calculated, corrected, statistically analyzed and output for power, torque and fuel consumption
correction tool
The calibration of the eddy current dynamometer is carried out using the mass value of the standard weight and the allowable range of the calibration code value of the calibration program, because the calibration digital value has a certain range of space (for example, a sensor with a maximum weighing capacity of 500kg, its 20kg weight The value multiplied by the length of the calibration arm can be calibrated to a display value of 200N. If the actualmass of the calibration weight is 200kg, the calibrated display value is 2000N.
High temperature adhesive sheet and leak test machine
Technical features:
1. Used for high-temperature bonding of locking friction plates in the torque converter and leak testing after welding of the torque converter:
2. The heating temperatures of the upper and lower pressure plates can be set separately;
3. With workpiece preheating function;
4. Heating timing alarm;
5. Fully pneumatic operation;
6. Special leak test rubber sleeve can seal well when pneumatically tightening the torque converter journal;
7. Simple operation and good leak test effect.
Configuration:
1. Imported cylinder;
2. 4KW electric heating wire;
3. Stainless steel water tank;
4. Specifications and dimensions mm: length x width x height: 1350x800x1800.
ABOUT US
Audited Supplier 
1. Satisfy the test requirements of 0-700KW, engine within 3000 rpm. 
){kind=link}