2022 Baohua Ultrathin Wheel Alignment Scissor Lift on Ground Mounted for Car Workshop Equipment

• After-sales Service: Online
• Warranty: 36 Months
• Type: Four Cylinder Hydraulic Lift
• Lifting Capacity: 4T
• Driving Type: Hydraulic
• Certification: CE
• Model NO.: CR-6108D
• Driving Motor Number of Mechanical Lift: 2
• Double Cylinder Lift Type: Planer-type
• Shearing Lift Type: Ultrathin Type
• Condition: New
• Brand: Baohua
• Capacity: 4t (4000kgs)
• Secondary Lift Capaicty: 3t
• Voltage: 220V/380V 50/60Hz
• Power: 3HP
• Max. Lifting Heihgt: 1850mm
• Secondary Jack Lifting Height: 1500-1900mm
• Lifting Time: 12seconds
• Transport Package: by Case
• Specification: 289*3300*2800mm
• Trademark: Baohua
• Origin: Guangdong

Product Description

Hydraulic cylinder:3 hydraulic cylinders on one side (2 in the front and 1 in
the back),1 hydraulic cylinder on each side of the secondary lift , a total of 8
hydraulic cylinders, make the lift lift up more quickly, and the X-arm is
safer and stronger during the lifting.Other manufacturers only have 6
hydraulic cylinders.

 

standard ultra-thin turning table, other manufacturers do not so thin. The
wire from the control cabinet to the lift is protected by the bottom plate and
will not be crushed by cars or people.
Platform:The thickness of the platform is 19cm, which is ultra-thin. Other
manufacturers are 22cm thick on the side slides. The orange guards prevent
the car from running forward.

 

The wire is different from other manufacturers.
Control system: There are two valves, one to control the oil outlet and the
other to control the oil return.
Pump station (motor): The wire is copper wire, the shell is all aluminum
alloy, and the heat dissipation is fast
Oil-Water Separator: Filters water and oil, reducing breakdowns and
extending machine life

 

Unlocking cylinder: double cylinder safety device, 2 cylinders on one side
(located next to the hydraulic cylinder at the back), one is broken, the other
still works, a total of 4 cylinders, separate the safety teeth more powerfully
and quickly lift up.

 

1. 3D turnplate standard

2. Pumps and seal kits, ball valves are import from Italy

3.All the hydraulic cylinder are import from Taiwan

4.Inside of cylinder assy has the special treatment and make sure that is
doesn't leak oil

5. 24V control system and limited switch

6. Mini. Height on ground for 150mm platform lenght 4500mm